Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
Freedman Electronics Pty Ltd is an Australian audio-technology manufacturer best known as the parent company and operator of RØDE Microphones. Founded in Sydney in 1967, the company designs and manufactures professional and consumer audio hardware including studio, broadcast, wireless and on-camera microphones, podcasting and streaming consoles, audio interfaces, headphones, and related digital audio products. Freedman is notable for maintaining substantial vertically integrated manufacturing in Sydney, including precision metalworking, electronics production, acoustic testing, and microphone capsule manufacture. Its products are widely used for music recording, filmmaking, broadcast, podcasting, location sound and content creation, and are sold internationally in more than 100 countries.
Wireless GO, Wireless PRO, VideoMic NTG and other rechargeable RØDE products can stop charging, fail to retain charge, or operate only while externally powered. Aging lithium cells, charging circuitry, USB-C connections, and power-management faults are common hardware-level suspects.
USB-equipped microphones, wireless systems and RØDECaster products may stop being recognized by computers or mobile devices despite known-good cables and ports. Persistent cases can involve worn USB-C connectors, damaged solder joints, USB interface circuitry, or failed data-line components.
Products may refuse to power on, wake only when USB power is attached, or shut down unpredictably. VideoMic NTG and RØDECaster-family reports particularly point toward battery, regulator, power-supply, or internal power-management faults when resets and firmware recovery fail.
NT-USB-series microphones, VideoMic models and Wireless GO systems are repeatedly reported with crackling, popping, robotic audio or intermittent dropouts. After host, cable and buffer problems are eliminated, faults can originate in USB audio circuitry, converters, connectors, RF sections or internal power regulation.
A microphone or wireless receiver may appear powered and connected yet produce no usable audio or intermittently lose its signal. Likely hardware causes include failed microphone capsules, preamp stages, damaged 3.5 mm/XLR/USB connectors, ADC circuitry or internal interconnects.
RØDECaster Pro II and RØDECaster Duo units can become stuck on the loading screen, repeatedly reboot or fail to complete startup. Firmware corruption can imitate the fault, but persistent cases may involve power regulation, flash storage, processor-board or peripheral-interface failures.
RØDECaster Duo, RØDECaster Pro II and Streamer X users report excessive hiss or background noise from headphone outputs, particularly with sensitive low-impedance headphones or IEMs. When present independently of inputs and cabling, the headphone amplifier, grounding, power filtering or analog output stage is the primary hardware area of concern.
RØDECaster-family hardware can develop nonresponsive or erratic rotary encoders, buttons and other physical controls. Failures are commonly associated with worn encoder mechanisms, switch contacts, connector problems or control-board faults rather than the audio signal path itself.
Wireless GO and other digitally controlled RØDE products can become stuck with LEDs illuminated, remain in bootloader mode, or become undetectable after an interrupted firmware update. Many units recover after a reset or full discharge, but persistent failures may indicate corrupted flash memory, unstable power circuitry or a damaged controller board.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write Freedman Electronics in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
