Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
Drawmer Electronics is a British professional-audio equipment manufacturer best known for high-end analog dynamics processing, noise gates, compressors, equalizers, microphone preamps, channel strips, monitor controllers, signal-distribution hardware, speaker protection systems and digital/master-clock equipment. Founded by Ivor Drawmer following development of the DS201 Dual Noise Gate, the company became particularly well known in recording studios, broadcast facilities and live-sound environments for products such as the DS201, DL241/DL441 compressors and the valve-based 1960 series. Its modern range includes the 1970-series analog processors, CMC/MC monitor controllers, 500-series modules, distribution amplifiers and clock-management systems. Drawmer emphasizes that its hardware continues to be designed and built in the United Kingdom, rather than outsourced as generic OEM hardware. Drawmer Electronics
Aging electrolytic capacitors, regulators, rectifiers, or other PSU components can cause no-power conditions, hum, unstable supply rails, excessive heat, or intermittent operation. Older DS201, DL-series, 1960, and similar long-serving rack units are particularly susceptible.
Front-panel potentiometers can become noisy, intermittent, or develop dead spots, causing signal dropouts or controls that respond only when the knob is moved or pressed. DS201 Range controls are specifically documented exhibiting this behavior.
Optical gain-control elements used in Drawmer dynamics processors can age or drift, producing incorrect gain reduction, weak compression, channel mismatch, or abnormal attack/release behavior. Opto-cell servicing is specifically identified by professional Drawmer repair services as a common repair requirement.
Analog component aging can cause compressor, limiter, gate, and level-control circuits to drift out of calibration. Symptoms include unequal channels, incorrect thresholds, inaccurate gain reduction, or attack/release characteristics that differ substantially between channels.
Mechanical stress and decades of thermal cycling can produce fractured solder connections around potentiometers, connectors, power components, and front-panel assemblies. These faults commonly present as intermittent audio, controls that cut in and out, or operation that changes when the chassis or control is disturbed.
Drawmer 1960, 1968, and other valve-equipped processors can develop worn tubes or faults in their heater/high-voltage supply circuitry. Symptoms include increased noise, distortion, reduced output, channel imbalance, intermittent operation, and excessive heating around the tube power-supply components.
DS201 and other Drawmer dynamics processors can develop faults in their gain-control path that cause unexpected attenuation, failure to gate correctly, or intermittent level drops while bypass remains normal. Problems may originate in the FET/VCA control circuitry, sidechain electronics, aging capacitors, or associated control components.
Aging bypass switches, mode switches, relays, and jack-normal contacts can oxidize or wear, producing missing audio, intermittent channels, failed bypass functions, or signal changes when controls are operated. Drawmer processors use numerous mechanical switching and relay elements throughout their signal-routing circuits.
Older Drawmer rack processors can develop mains-transformer faults or excessive transformer vibration, sometimes accompanied by blown fuses, hum, or complete loss of power. DS201 repair reports specifically document suspected transformer failures associated with repeated fuse blowing.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write Drawmer Electronics in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
