Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
Digipas Technologies Inc. is a precision electronic measurement and instrumentation manufacturer best known for its Digi-Pas® digital levels, dual-axis inclinometers, machinist levels, precision tilt sensors, surface-flatness instruments, and alignment/straightness measurement systems. Its higher-end products use MEMS-based angular sensing and are aimed at precision engineering, CNC machine setup, metrology, semiconductor manufacturing, aerospace, robotics, research laboratories, industrial maintenance, construction, and related applications. The broader Digipas/JSB group also develops eGeeTouch smart electronic locks, Ventura V-Flex flexible flat cables, and other electronic products, but precision digital leveling and angular measurement are the core Digi-Pas product identity. Digipas states that it has more than two decades of R&D and manufacturing experience and manufactures through ISO 9001/14001-certified facilities.
Digital levels can develop zero-offset or accuracy drift, causing measurements to differ from the expected reference angle. Digi-Pas provides user self-calibration and Absolute Level procedures across many DWL models specifically to correct residual offset and accuracy errors.
Units may fail to power on, shut down unexpectedly, or behave erratically because of depleted batteries, poor battery contact, incorrect polarity, or battery-compartment issues. Precision DWL models commonly depend on AAA or coin-cell batteries, making the power circuit and battery contacts frequent troubleshooting points.
Bluetooth-equipped DWL precision levels may fail to pair with or be detected by the Digi-Pas mobile apps. Low battery voltage, Bluetooth being disabled on the instrument, communication-module problems, or app/device connectivity faults can cause this condition.
Dropping or mechanically shocking a Digi-Pas level can alter its measurement accuracy even when the enclosure remains visibly intact. Impact can cause structural deformation or shift the sensor's reference relationship, resulting in incorrect or inconsistent readings.
Moisture entering the battery or electronics compartment can cause corrosion, intermittent operation, inaccurate readings, or complete electronic failure. Digi-Pas specifically warns that improperly secured battery compartments can allow water intrusion and damage the entire device.
Exposure to excessive heat or temperatures outside the specified operating range can produce unstable readings, calibration changes, or permanent mechanical/electronic damage. Digi-Pas warns that prolonged exposure to hot surfaces can deform housings and damage internal electronics.
The LCD or graphical display can become blank, intermittent, dim, or otherwise fail even though the measurement electronics may still be powered. Likely hardware causes include depleted power sources, damaged display connections, LCD assemblies, or associated display/power circuitry.
Inclination sensors can develop a persistent residual offset where the instrument no longer reports the same value after reversal or when returned to a known reference surface. Digi-Pas specifically directs users toward self-calibration or Absolute Level setting to eliminate these residual offsets.
Higher-end DWL precision levels rely on USB for external power and PC synchronization, making the USB connector and communication path potential failure points. Poorly regulated USB power, connector damage, cable faults, or interface-circuit problems can cause unstable operation or loss of PC communication.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write Digipas in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
