Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
d&b audiotechnik is a German manufacturer of premium professional audio and sound-reinforcement systems, founded in 1981 and centered on its manufacturing operation in Backnang. The company develops integrated sound systems built around professional loudspeakers, subwoofers, amplifiers, signal processing/networking technology, accessories and system-control software. Rather than treating speakers as standalone products, d&b is particularly known for its integrated “system” approach in which loudspeakers, amplification, processing and software are engineered to operate together. Its equipment is used for touring and live entertainment as well as permanent installations in venues ranging from theaters and concert halls to arenas and stadiums. The company emphasizes German manufacturing and consistent, high-quality sound coverage across an audience, and today employs more than 1,000 people globally while supporting customers in more than 70 countries.
Amplifier fails to start, repeatedly restarts, shuts down, or reports SMPS/Power-OK errors. Documented causes include defective SMPS hardware, internal supply-rail faults, and communication failures between the DSP and power supply.
One or more amplifier channels mute or stop producing output because of an internal amplifier fault. Typical indications include Amp Error, supply-rail faults, DC detected at the output, or internal amplifier communication errors.
The amplifier or power supply reaches excessive temperature and reduces operation or shuts its outputs down to protect the hardware. Restricted airflow, inadequate cooling, heavy sustained loads, or a defective temperature-sensing circuit can cause or contribute to the condition.
An LF, MF or HF driver becomes open, disconnected, damaged, or electrically abnormal, resulting in partial or complete loss of output from a cabinet. d&b Load Monitoring is specifically designed to detect impedance changes associated with individual driver or loudspeaker failures.
An amplifier channel enters protection or mutes after detecting excessive output current. Common causes include shorted loudspeaker cabling, abnormally low load impedance, wiring faults, or a fault in the connected loudspeaker.
The amplifier fails to boot its DSP correctly, loses DSP communication, reports invalid DSP data, or mutes because the required processing program cannot operate. The fault can originate from DSP hardware, internal communications, corrupted/invalid data, or software/firmware problems.
The amplifier shuts down, refuses to start, or reports undervoltage, overvoltage, or missing internal supply rails. The source can be unstable external mains power, an overloaded amplifier stage, or failure within the SMPS or amplifier power circuitry.
Communication between DSP, amplifier, SMPS, ADDAC, display, or other internal electronics fails and produces system or I2C/communication errors. Depending on the affected module, the unit may boot incorrectly, mute channels, lose control functionality, or require service.
Incorrect, damaged, shorted, or grounded loudspeaker wiring causes abnormal impedance, ground-fault, or protection indications. The amplifier may mute the affected output to protect itself and the loudspeaker until the external wiring fault is corrected.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write d&b audiotechnik in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
