Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
BISSELL is a family-owned American manufacturer specializing in household floor-care and cleaning equipment. Founded in 1876, the company grew from its original mechanical carpet sweeper into a major global cleaning-products brand. Its product portfolio includes upright, stick, handheld and robotic vacuum cleaners; portable and upright carpet/deep cleaners; wet-dry floor cleaners such as the CrossWave line; steam cleaners; hard-floor cleaning systems; air purifiers; and specialized cleaning formulas. BISSELL is particularly known for carpet and upholstery cleaning equipment, pet-focused cleaning products, portable spot cleaners such as the Little Green family, and integrated wet/dry floor-cleaning machines. The company describes itself as a manufacturer of floor-care products and operates internationally through a combination of its own operations and global finished-goods suppliers.
Vacuum airflow becomes weak or disappears because of clogged filters, obstructed air passages, damaged hoses, improperly seated dirt tanks, or suction-motor faults. This is common across BISSELL upright, stick, handheld, and wet/dry models.
The powered brush stops rotating because of hair or debris buildup, seized brush bearings, damaged brush-roll ends, worn drive gears, belt failure, or a brush motor fault. Some BISSELL models shut down or display an error when excessive brush resistance is detected.
Carpet cleaners and wet/dry machines stop dispensing cleaning solution because of blocked spray tips, an unprimed or failed pump, clogged tubing, damaged tank valves, or poorly seated clean-water tanks. CrossWave, SpotClean, Little Green, and ProHeat families commonly have dedicated troubleshooting for this condition.
Clean or dirty water escapes from the machine because of cracked tanks, damaged seals, duckbill gaskets, tank valves, hoses, pumps, or internal fittings. Leakage can occur from the base, tank area, vents, hose connections, or internal fluid system.
Cordless BISSELL models may stop charging, run only briefly, or show battery error lights because of degraded lithium-ion cells, battery-management faults, charger problems, or poor battery connections. Severe battery degradation can also cause the machine to appear completely dead.
The machine will not start or unexpectedly shuts off because of battery faults, electrical connection problems, thermal protection, airflow blockages, brush-roll overloads, switch faults, or motor/control-board problems. Some models intentionally shut down when a brush or airflow obstruction is detected.
Brushes stop turning or operate inconsistently when a rubber drive belt stretches, slips, overheats, or snaps. Belt damage is especially associated with brush jams, seized rollers, and heavily loaded carpet-cleaner brush assemblies.
Wet cleaners leave excessive water behind when recovery airflow is restricted, the dirty-water tank is improperly seated, the float has activated, seals are leaking, the nozzle is blocked, or the suction path is damaged. The machine may still dispense solution normally while recovering very little liquid.
Internal pumps, solenoid valves, tank valves, fittings, or solution tubing can fail and prevent correct water flow. Symptoms commonly include no spray, intermittent spray, continuous leaking, or water draining through the machine as soon as the clean-water tank is installed.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write BISSELL in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
