No Video Output
Camera powers on but produces no usable HDMI, SDI, USB, or network video. Common hardware-related causes include failed video-output circuitry, damaged connectors, internal signal-path faults, or unstable cable interfaces.
AViPAS
Repair, Service, and Parts
Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
China
Manuf. Location
≈ US $3M
Annual Revenue (est)
Professional Video
End Use Segment
AViPAS Inc. is a professional audiovisual equipment company founded in 2014 that specializes primarily in PTZ video cameras and camera-control equipment for conferencing, live production, streaming, education, houses of worship, security, and broadcast applications. Its product range includes Full HD and 4K PTZ cameras with HDMI, SDI, USB and IP connectivity, joystick camera controllers, box cameras and webcams, along with related switching, encoding/decoding, matrix, multiview and video-distribution products. AViPAS is particularly associated with comparatively accessible professional PTZ systems that support technologies such as VISCA/VISCA-over-IP, ONVIF, PoE, H.264/H.265 streaming and multi-interface video output. The company describes its focus as designing and distributing professional AV products that simplify video production and conferencing workflows.
2 Most Seen Failures:
Power Failure / No Power
Camera shows no power indicator, performs no startup self-test, and has no lens movement or video output. Typical causes include a failed AC adapter, damaged DC input jack, loose power connection, or internal power-supply circuitry failure.
Pan/Tilt Mechanism Failure
Camera powers up but the PTZ head does not move correctly, stops during its startup self-test, or fails to respond to pan and tilt commands. Likely hardware faults include worn or stalled motors, damaged drive components, position-sensing faults, or internal motor-control electronics.
Intermittent Video
Video repeatedly cuts out, drops signal, or becomes unstable during operation. AViPAS documentation commonly associates this symptom with unstable video connections, making damaged output ports, connector solder joints, cables, or internal video-interface circuitry common repair targets.
Network / Ethernet Port Failure
Camera cannot be reached through its IP interface despite otherwise powering and operating normally. After configuration issues are excluded, likely hardware faults include the Ethernet jack, magnetics, network PHY circuitry, PoE circuitry, or mainboard network components.
RS-232 / RS-485 Control Failure
Camera produces video but cannot be controlled through its wired serial interface. Damaged serial connectors, line-driver/receiver ICs, broken PCB connections, or control-board faults can prevent VISCA, Pelco, or other serial commands from reaching the camera.
Zoom / Lens Drive Failure
Optical zoom does not operate, moves erratically, stalls, or fails during camera initialization. Common hardware causes include a defective zoom motor, damaged lens-drive gears, position-feedback components, or the lens control electronics.
Image Jitter / Shaking
Video shakes or dithers noticeably, particularly at longer optical zoom settings. Although unstable mounting can produce the same symptom, persistent camera-originated jitter can indicate mechanical looseness, worn PTZ bearings or drive components, or instability within the lens assembly.
IR Remote Receiver / Control Failure
Camera cannot consistently respond to its IR remote even with known-good batteries and correct camera addressing. Once setup issues are excluded, likely faults include the IR receiver module, front-panel sensor connection, associated control circuitry, or the main control board.
1 Acme Revival offers repair, service, and part rebuild opportunities for most AViPAS devices.
Connect with a technician.
- 1 Repairs are performed on a best-effort basis. Acme Revival utilizes a network of sophisticated technicians and engineers with diverse service offerings; despite this, factors that influence the repair outcome may ultimately prove unsuccessful. Acme Revival makes no claim that it can, guarantee a repair before your device is sent in for diagnostic evaluation; even then, repair and diagnostic work are not mutually exclusive. Despite well-intentioned quoting, repairs may still prove unsuccessful.
- 2 Per information known, researched and collected by Acme Revival and its systems at time of page publishing (September 22, 2026).
- *Information regarding this manufacturer/brand/organization is estimated with information collected and known to Acme Revival. This information is intended to provide insights into the spotlight entity, however may not be accurate— information is strictly of estimate nature only.
- **The model list shown here may not be an all-inclusive list of the EcoFlow product range. Model list has been derived per information known, researched and collected by Acme Revival and its systems for the US market.
