Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
Audio-Technica is a Japanese audio-equipment manufacturer founded in 1962, originally becoming known for high-performance phono cartridges before expanding into microphones, headphones, wireless microphone systems, turntables, conferencing equipment, mixers, and other professional and consumer audio electronics. It designs and manufactures products for recording studios, broadcast, live sound, corporate and government installations, houses of worship, content creation, and home listening. The company remains particularly well known for its microphones, studio/monitoring headphones, turntables and phono cartridges, and it also operates as an OEM supplier of audio transducers and related specialty devices.
One earcup loses audio, becomes quieter, or cuts in and out, particularly on ATH-M50x-family headphones. Common hardware causes include broken internal headband wiring, fatigued solder joints, damaged jack contacts, or failed driver connections.
Hinges, yokes, and swivel assemblies can crack, loosen, or separate after repeated folding and adjustment. Damage can also strain or break the internal cable routed through the hinge, causing additional audio failure.
Bluetooth headphones such as ATH-M50xBT-series models may stop accepting a charge or remain completely inactive when connected to power. Battery degradation, protection-circuit lockout, charging-board faults, or connector problems are frequent causes.
Wireless headphones and earbuds may fail to enter pairing mode, repeatedly disconnect, or stop establishing a stable Bluetooth link. Failed wireless control electronics, firmware lockups, antenna problems, or power instability can produce these symptoms.
True-wireless earbuds may fail to charge even when seated in the charging case. Contaminated or worn charging contacts, weak case batteries, damaged pogo pins, and charging-control faults are common hardware-related causes.
AT-LP-series turntables can power on while the platter remains stationary or struggles to start. A slipped, stretched, broken, or incorrectly positioned drive belt is particularly common on belt-driven models such as the AT-LP60 and AT-LP60X.
Playback may run too fast, too slow, or fluctuate during operation. Stretched belts, motor deterioration, contaminated mechanisms, pitch-control faults, or aging speed-control electronics can cause unstable platter rotation.
The stylus may jump grooves, repeatedly skip, or fail to track records correctly. Worn or damaged styli, cartridge problems, tonearm mechanism faults, incorrect tracking force, or vibration-related mechanical issues are typical causes.
Audio-Technica microphones, mixers, and USB audio products may produce no signal, intermittent output, distortion, or unusually low levels. Failed connectors, damaged cables, capsule faults, USB interface electronics, preamp circuitry, or internal solder connections are common hardware causes.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write Audio-Technica in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
