Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
Appotronics Corporation Limited is a Shenzhen-based optical technology and manufacturing company specializing in laser display systems, optical engines, and core laser-light-source components. Founded in 2006, the company developed its proprietary ALPD® (Advanced Laser Phosphor Display) semiconductor laser technology in 2007 and has since commercialized it across cinema projection, professional and engineering projectors, home theater, automotive displays and lighting, and emerging AR applications. Its hardware portfolio includes laser projectors, cinema projection systems and light sources, laser TVs/home-theater systems, optical engines and modules, automotive projection components, AR optical engines, and related laser-display equipment. Appotronics is particularly known for ALPD technology and its large presence in digital cinema; the company states that more than 43,000 cinema theaters worldwide have been equipped with its ALPD laser-light-source solutions.
The ALPD laser light source fails to initialize or illuminate, resulting in no projected light, abnormally low brightness, or a protection shutdown. Appotronics diagnostic indicators specifically identify "light source failed to be enabled" and laser-source temperature faults.
One or more internal cooling fans fail to start, run below the required speed, or report an abnormal state. The projector may overheat, enter protection mode, or shut itself down to prevent damage.
Excessive temperature at the laser source, DMD, color-wheel assembly, power section, or inside the chassis triggers thermal protection. Blocked ventilation, cooling-system problems, or abnormal ambient temperatures can cause repeated shutdowns.
The color wheel fails to initialize, maintain proper speed, or synchronize with the imaging system. Symptoms can include startup failure, abnormal colors, flickering, mechanical noise, loss of image, or automatic shutdown.
The DMD imaging device fails to initialize or the DLP subsystem develops an operating fault. Typical symptoms include no image, corrupted projection, pixel defects, abnormal patterns, or a DLP/DMD protection error.
Internal power circuitry fails to produce the required supply voltage, including the specifically documented loss of the 12 V output. The projector may remain completely dead, fail during startup, or shut down unexpectedly.
The projector detects an abnormal condition in its signal-processing electronics or main control board. This can produce no image despite a valid source, intermittent video, input-detection problems, or failure to complete startup.
Communication or synchronization between DLP processing components becomes abnormal, including documented DID and DDP synchronization faults. The result can be failed startup, unstable projection, corrupted video, or a system-protection condition.
The liquid-cooling pump used by applicable high-output laser models generates a pump alarm or stops circulating coolant correctly. Insufficient coolant circulation can rapidly increase laser-source temperature and force the projector into thermal protection or shutdown.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write Appotronics in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
