Andis

Repair, Service, and Parts

Andis repair, service, and parts

Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.

Sturtevant, Racine County, Wisconsin, USA
Manuf. Location
≈ US $169M
Annual Revenue (est)
Professional grooming tools
End Use Segment

Andis is a family-owned American manufacturer founded in 1922 that specializes in powered grooming equipment for professional barbers, hairstylists, pet groomers, livestock handlers, and consumers. Its product portfolio centers on electric clippers, cordless and corded trimmers, foil shavers, detachable and adjustable-blade clippers, grooming kits, and related styling tools, with especially strong recognition in professional barbering and animal grooming. The company is known for long-running product families such as the Master, T-Outliner, AGC, ProClip, Pulse ZR, and ProFoil lines, along with replaceable professional-grade blade systems. Andis remains family owned more than a century after its founding and continues to manufacture many products at its Wisconsin operation while sourcing some materials and finished products globally

2 Most Seen Failures:

Worn or Broken Blade Drive

The blade drive/cam assembly wears with use and can cause weak cutting, rattling, stalled blades, or a clipper that runs normally until a blade is attached. Andis specifically identifies blade-drive replacement as a common maintenance procedure for detachable-blade clippers. :contentReference[oaicite:0]{index=0}

Dull, Misaligned, or Damaged Blades

Clippers and trimmers may pull hair, snag, leave uneven lengths, or require repeated passes when blades become dull, rusty, damaged, contaminated, or improperly aligned. This is especially common on T-Outliner and other close-cutting Andis models. :contentReference[oaicite:1]{index=1}

Power Switch Failure

Worn, pitted, or intermittent power switches can cause Andis clippers to start inconsistently, shut off unexpectedly, or fail to power on. Switch problems are repeatedly reported on models including the AGC, Pulse ZR/ZR II, and older corded professional clippers. :contentReference[oaicite:2]{index=2}

Power Cord or Internal Wire Failure

Repeated flexing can break conductors near the plug, strain relief, or internal terminals, resulting in intermittent power, reduced motor speed, or complete loss of power. Cord faults are a documented troubleshooting cause on Andis corded clippers such as the T-Outliner. :contentReference[oaicite:3]{index=3}

Battery Capacity Loss

Lithium-ion batteries in cordless Andis clippers and shavers eventually lose runtime, may show charge but collapse under load, or require operation from the charger. Battery degradation is frequently reported on the Pulse ZR II and ProFoil/TS-series shavers. :contentReference[oaicite:4]{index=4}

Charging Contact or Charger Failure

Dirty charging contacts, poor connector contact, failing charging bases, or adapter problems can prevent charging or produce flashing charger indicators. Andis documentation specifically instructs users to inspect and clean charging contacts on the Pulse ZR II and verify adapter connections on ProFoil shavers. :contentReference[oaicite:5]{index=5}

Motor or Coil Failure

A failing motor or electromagnetic coil can cause no-start conditions, low speed, excessive vibration, abnormal noise, or weak cutting under load. Motor/coil replacement is a documented repair on models such as the Andis Master and is also listed as a cause of slow or non-running T-Outliners. :contentReference[oaicite:6]{index=6}

Excessive Noise and Vibration

Loose hardware, worn blade-drive components, damaged blades, poor blade alignment, or worn internal mechanisms can make Andis clippers unusually loud or cause excessive vibration. Users commonly report this symptom on Master and Pulse ZR-series clippers. :contentReference[oaicite:7]{index=7}

Overheating or Load Shutdown

Hair buildup, inadequate lubrication, high blade friction, a seized drive, battery weakness, or electronic overload protection can make a clipper slow down and shut off during operation. Pulse ZR II reports frequently describe speed dropping from normal operation to warning indications and complete shutdown when a blade is installed. :contentReference[oaicite:8]{index=8}

1 Acme Revival offers repair, service, and part rebuild opportunities for most Andis devices.

Connect with a technician.

1 Repair Now +
  1. 1 Repairs are performed on a best-effort basis. Acme Revival utilizes a network of sophisticated technicians and engineers with diverse service offerings; despite this, factors that influence the repair outcome may ultimately prove unsuccessful. Acme Revival makes no claim that it can, guarantee a repair before your device is sent in for diagnostic evaluation; even then, repair and diagnostic work are not mutually exclusive. Despite well-intentioned quoting, repairs may still prove unsuccessful.
  2. 2 Per information known, researched and collected by Acme Revival and its systems at time of page publishing (September 15, 2026).
  3. *Information regarding this manufacturer/brand/organization is estimated with information collected and known to Acme Revival. This information is intended to provide insights into the spotlight entity, however may not be accurate— information is strictly of estimate nature only.
  4. **The model list shown here may not be an all-inclusive list of the EcoFlow product range. Model list has been derived per information known, researched and collected by Acme Revival and its systems for the US market.