Amino Communications

Repair, Service, and Parts

Amino Communications repair, service, and parts

Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.

Suzhou, Jiangsu, China
Manuf. Location
≈ US $12M
Annual Revenue (est)
Video Streaming
End Use Segment

Amino Communications is a UK-origin B2B video technology manufacturer best known for IPTV, OTT and managed video-streaming set-top boxes used by telecom operators, Pay TV providers, hospitality systems, enterprises and digital-signage networks. Its hardware families have included AmiNET, Kamai, Amigo and related IP video receivers, while its broader offering combines those devices with embedded software, device-management tools and SaaS services for deploying and maintaining large fleets of connected video endpoints. Amino was an early specialist in IP-delivered television and became particularly established in operator-grade IPTV receivers rather than consumer retail electronics. More recently, its focus has expanded from traditional Pay TV toward enterprise video and digital signage, while continuing to supply managed streaming devices.

2 Most Seen Failures:

No Power / Power Supply Failure

The set-top box is completely dead, shows no front-panel power LED, or powers off intermittently. Aging or failed external AC adapters, DC input circuitry, and internal power-regulation components are common hardware suspects on Amino A140, A540 and related STBs.

HDMI Output / No Video

The unit powers on but the television displays a black screen, “No Signal,” intermittent video, or corrupted output. Failed HDMI connectors, damaged output circuitry, cable-interface faults, or HDMI handshake-related hardware problems are frequent service symptoms across Amino STBs and H-series media players.

Ethernet / Network Interface Failure

The box cannot establish a wired network link, repeatedly reports no network connection, or remains offline despite a known-good cable and network. Amino specifically identifies failure to communicate with the Ethernet chip as a fatal hardware condition on affected STB platforms.

NAND Flash / Internal Storage Failure

The device may hang during startup, reboot continuously, fail firmware updates, or become unable to load its operating system. Amino diagnostic documentation specifically identifies NAND flash hardware/format failure and failed flash writes as faults capable of preventing normal boot operation.

Boot Loop / Startup Failure

The STB repeatedly restarts, freezes during initialization, or never reaches the television service interface. Hardware-related causes include failing flash memory, SDRAM faults, corrupted storage, unstable power regulation, or other main-board failures.

Overheating / Thermal Shutdown

The device becomes unstable, freezes, reboots, or stops operating after warming up. Amino explicitly lists STB overheating as a fatal hardware diagnostic condition, making thermal-management and heat-related board faults a recurring failure category.

Remote / IR Control Failure

The STB does not respond to remote commands even though the remote appears to transmit normally. Common causes include IR receiver problems, Bluetooth/IR pairing hardware issues, failed remote controls, damaged buttons, or degraded battery contacts.

SDRAM / Memory Failure

The box fails to boot correctly, locks up, crashes, or enters a persistent diagnostic flashing state. Amino specifically identifies SDRAM access failure as a fatal hardware fault in its STB diagnostic system.

Audio Output Failure

Video remains present but sound is missing, intermittent, distorted, or unavailable through HDMI, S/PDIF, or analog outputs. After external cables and configuration are eliminated, likely hardware causes include damaged connectors, audio-output circuitry, HDMI interface faults, or main-board codec/output-stage failure.

1 Acme Revival offers repair, service, and part rebuild opportunities for most Amino Communications devices.

Connect with a technician.

  1. 1 Repairs are performed on a best-effort basis. Acme Revival utilizes a network of sophisticated technicians and engineers with diverse service offerings; despite this, factors that influence the repair outcome may ultimately prove unsuccessful. Acme Revival makes no claim that it can, guarantee a repair before your device is sent in for diagnostic evaluation; even then, repair and diagnostic work are not mutually exclusive. Despite well-intentioned quoting, repairs may still prove unsuccessful.
  2. 2 Per information known, researched and collected by Acme Revival and its systems at time of page publishing (September 15, 2026).
  3. *Information regarding this manufacturer/brand/organization is estimated with information collected and known to Acme Revival. This information is intended to provide insights into the spotlight entity, however may not be accurate— information is strictly of estimate nature only.
  4. **The model list shown here may not be an all-inclusive list of the EcoFlow product range. Model list has been derived per information known, researched and collected by Acme Revival and its systems for the US market.