Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
ALM/Busy Circuits is a UK boutique audio-electronics OEM specializing primarily in Eurorack modular synthesizer hardware. Founded by designer Matthew Allum after developing the original Pamela’s Workout clock module, the company has grown to offer nearly 50 modules plus standalone hardware and software. Its portfolio spans clocking and modulation sources, oscillators and synth voices, sequencers, samplers, filters, effects processors, mixers, interfaces and expansion modules. ALM is particularly known in the modular-synth market for the Pamela’s Workout family, along with products such as Squid Salmple, MFX and its Akemie-series synthesis modules. Its products emphasize compact hardware, hands-on control, creative functionality and distinctive implementations of both analog and digital synthesis technologies.
Module does not boot, boots only intermittently, or requires repeated power cycling. Common causes include inadequate startup current, an overloaded/faulty Eurorack power supply, a bad ribbon cable, or a poor bus-board connection.
Digital ALM modules can lock up, become unresponsive, or crash during operation. Firmware problems or corrupted settings are common first suspects, with ALM recommending firmware updates and a factory reset before hardware service.
The module operates unpredictably, with controls, outputs, or digital functions behaving abnormally despite otherwise powering normally. Power-supply problems, firmware state, or corrupted settings are frequent causes.
The module fails to recognize or install a firmware image, particularly on USB-equipped products such as Squid Salmple. Incorrect filenames, incompatible USB media/cables, files placed in the wrong location, or an incorrect update procedure are common causes.
A computer fails to detect the module when connected for firmware updating. Charge-only USB cables, hubs, cable/connector problems, or failure to correctly enter update mode are common causes.
Oscillator pitch becomes inaccurate or fails to track 1V/octave correctly across its range. The oscillator generally requires recalibration when tuning becomes inconsistent.
Frequently operated buttons, encoders, or channel controls can become unreliable, requiring repeated presses or producing inconsistent responses. Owner reports include channel-button deterioration on heavily used Squid Salmple units.
A channel or module produces unexpectedly weak, absent, or inconsistent audio despite apparently operating normally. Reports are particularly associated with sampler output levels, although gain configuration and sample level should be ruled out before assuming a hardware fault.
Triggers or clocks produce double triggering, incorrect timing, missed events, or apparent synchronization errors. Signal width/level, PPQN configuration, upstream switching circuitry, or input-conditioning problems can mimic an actual input hardware failure.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write ALM Busy Circuits in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
