Acme Revival is an independent repair network that operates separately from the manufacturers whose devices we service. Our independence enables a repair model that exists beyond manufacturer-controlled strategies, while preserving the ability to work with manufacturers where appropriate.
ADAM Audio is a German professional-audio manufacturer founded in Berlin in 1999 and best known for active studio reference monitors used in recording, mixing, mastering, broadcast, and content-production environments. Its product portfolio includes the T, A, and flagship S Series studio monitors, subwoofers, desktop monitoring systems, and professional headphones. The brand's defining technology is its folded-diaphragm ART/X-ART/S-ART tweeter, derived from Air Motion Transformer principles and developed to provide high transient accuracy, low distortion, and detailed high-frequency reproduction. ADAM Audio has built a strong reputation among recording engineers, producers, musicians, and studios for precise monitoring and German engineering; since 2019 it has been part of the Focusrite Group.
The woofer stops producing sound or becomes extremely weak while the X-ART tweeter continues operating normally. This is repeatedly reported on A7, A5X, A7X and related active monitors and is commonly associated with failed woofer amplifier circuitry, PWM amplifier ICs, or the associated power board.
The monitor becomes completely dead, intermittently powers up, blows a fuse, or develops unstable audio as power-supply components age. Older AX-series amplifier boards in particular have documented failures of electrolytic capacitors and power-stage components.
A monitor develops persistent buzzing, crackling, static, or irregular noise even when no signal cable is connected. Recurring A7X reports associate this symptom with failing amplifier-board capacitors, power electronics, or other internal circuitry rather than the external audio source.
Bass output becomes dramatically weaker or disappears even though the monitor remains powered and high-frequency audio is still present. Failures have been traced to woofer amplifier sections, controller boards, power circuitry, and occasionally broken woofer lead wires.
Bass notes cause a rattle, buzz, or vibration that becomes more obvious at moderate or high playback levels. Reported A7X cases include internal wiring contacting the cone as well as driver, cabinet, or mounting-related vibration.
The X-ART or U-ART tweeter produces little or no treble, becomes intermittent, or generates distorted high-frequency output. Causes can include tweeter damage, its dedicated amplifier channel, amplifier-board faults, or damaged internal connections.
The monitor initially works normally but loses a driver, develops distortion, or begins making noise after operating for several minutes. Aging amplifier components, capacitors, regulators, and temperature-sensitive solder or semiconductor faults are common repair suspects.
The monitor powers on normally but produces no usable audio, or only very faint/distorted output. After external cables and signal-path problems are eliminated, ADAM's own troubleshooting guidance identifies an internal loudspeaker fault as the likely cause.
A woofer becomes silent even though its amplifier and tweeter remain functional because a flexible lead wire, connector, or other internal connection has opened. This failure has been specifically reported on A5X units and can closely mimic a failed woofer amplifier.
Connect with a technician.
Orders can typically be cancelled 24 hours prior to shipping
Get a real-time offer. Enter the make and model to begin.
Acme offers several ways to pay your service or repair balance.
Securely powered by 
This service is provided by Community Federal Savings Bank (“CFSB”), member FDIC, for which GoCardless Ltd acts as a third-party servicer.
Payable to ACME REVIVAL INC, write ADAM Audio in memo line, and mail your check to: 191 University Blvd. Suite 340, Denver, CO 80206. Payment are collected every weekday excluding federal holidays.
