Most common repairs + troubleshooting for the Midmark Ritter M11 (2nd-gen) Ultraclave Autoclave at Acme:

1. Power Interruption (E001): Occurs when there's an unexpected loss of power, possibly due to faulty outlets or overheating issues.
2. Stop Button Pressed (E002): Indicates the stop button was pressed during a cycle, potentially pointing to a faulty display board.
3. On/Standby Button Pressed (E003): This error is triggered if the On/Standby button is accidentally engaged during operation.
4. Door Ajar (E004): Signals the door wasn't properly latched, which might involve a faulty door switch or alignment issue.
5. High Pressure (E005): When the pressure exceeds 35 PSI during a cycle, suggesting overloading or a steam trap issue.
6. High Internal Temperature (E006): Occurs when internal temperatures exceed 277°F, indicating potential overloading or sensor issues.
7. Low Pressure (E007): Indicates a potential steam leak, requiring checks on the door gasket or internal components like valves.
8. Door Not Opening (E008): Occurs at the cycle's end, preventing transition to the dry cycle, possibly due to worn-out door mechanisms.
9. Pressure Buildup During Dry Cycle (E009): Suggests issues completing the dry cycle, potentially due to calibration errors.
10. Software Issues (E010, E011, E012): General software problems that may necessitate a reboot or PC board replacement.

est repair cost: $45 per hour